FREEZPHERE®

Traditional Methods
High energy cost, approximately 40% of the product has to be reprocessed because of particle size.
High maintenance cost, because of high amount of moving parts.
Large floorspace required in facility.
Uneven particle size distribution
Cleaning Difficulty does not allow product versatility
Use of environmentally unfriendly refrigerant gases.

The Freezphere® Difference
High energy savings through avoidance of reprocesses
Low maintenance cost because small amount of moving parts.
High Use of Facility space, due to Compact Design.
Precise control of particle size.
Environment Friendly
Easy Cleaning
Possibility of integration with CIMA LN2 plant.

Pre-Freezing
Process starts from an extract or liqueur (40-50% solid content)
Concentrate is cooled (3-5°C) prior to foaming.
After cooling, concentrate enters the foaming chamber, where N2 is injected to create a foam. Nitrogen flow is thoroughly controlled in order to assure constant density of the foam.
Immediately after foaming, precrystallizing is performed, where temperature is controlled very precisely in order to obtain homogeneous coloring of the crystal.

Freezphere®
Formation/Deep Freezing
Prefrozen product is gently pumped through a vibrating nozzle, generating small droplets of uniform size, which turn to perfectly shaped freezpheres® during free fall inside the freezing chamber, obtain a high quality product with the following characteristics.

– Perfectly spherical
– Free from dusts and fines
– Highly homogenous and monodispersed particle size.

After the freezing chamber, product is placed in trays and trolleys and taken to a deep freezing chamber (-40,-45°C) prior to the freeze drying process.

Freeze Drying
Trolleys are transported through a rail system inside the freeze drying chamber, where in controlled vacuum and temperature conditions, freeze drying process (dehydration by sublimation process) takes place.
Freeze drying system has the following characteristics:
Fully automated process
Recipe Operation for product versatility
Possibility of Residual moisture in product under 5%
Fully sanitary and easy cleaning design
High effectivity in steam collection and condensation.
Heat transfer by means of heating plates, without direct contact with the product, assuring dryness uniformity.
Automated loading and unloading (optional)
Redundant systems for cooling and vacuum (optional)

Packaging
Once product has been freeze dried is transported to packing area.
Packing versatility according to market needs (single dose, bag, jar, can).
Product packaging takes place under controlled Temperature and Humidity conditions assuring product integrity.
Sanitary design for easy cleaning.

Information
For more information visit the follow contact page.

Telephone

PANAMA
TEL. +507 205 1915
FAX. +507 205 1802

ARGENTINA
TEL. +54-11-4601-9150

GUADALAJARA, JAL.
TEL. +52-33-4777-6000

MEXICO, DF
TEL. +52-55-2455-5901

GUATEMALA
TEL. +502-5966-0585

CHILE
TEL. +56-2369-5637

COSTA RICA
TEL. +506-2588-2505
FAX. +506-2288-2245

COLOMBIA
TEL: 571 -3379771

EGYPTIAN
TEL. +202-2450-7094 / 5

USA
TEL. +1 508 456 2714

BRASIL
TEL: +55-19-3295-8362

PERU
TEL. +52 1221 3377

VENEZUELA
TEL: (+58) 212-823.2340

SHANGAI, CHINA
TEL. +86-21-54993845
FAX. +86-21-54992467

cima_blanco

World Trade Center. 1er Piso,
Área Comercial Calle 53 Marbella.
Apartado 0832-00155 WTC
Panamá, República de Panamá
+507 205 1915
+507 205 1802
sales@cimaindustries.com

See telephone numbers

PANAMA
Tel. +507 205 1915
Fax. +507 205 1802
ARGENTINA
Tel. +54-11-4601-9150
GUADALAJARA, MEX
Tel. +52-33-4777-6000
MEXICO,DF
Tel. +52-55-2455-5901
GUATEMALA
Tel. +502-5966-0585
CHILE
Tel. +56-2369-5637
COSTA RICA
Tel. +506-2588-2505
Fax. +506-2288-2245
COLOMBIA
Tel : 571 –3379771
EGYPT
Tel. +202-2450-7094/5
USA
Tel. +1 508 456 2714
BRAZIL
Tel: +55-19-3295-8362
PERU
Tel. +52 1221 3377
VENEZUELA
Tel: (+58) 212-823.2340
CHINA
Tel. +86-21-54993845
Fax. +86-21-54992467